ASTM A53/A106 Gr.B Black Seamless Carbon Steel Pipe

Carbon steel product Introduction:
The complex chemical and physical properties of the various grades of Carbon Steel Pipe  allow for a broad range of service usage. American Piping Products has the right grade, size and price to meet your requirements, including A/SA-106 GRADE B/C  and API 5L X-42 thru X-70. A/SA-106 Grades B & C are utilized for services ranging from structural supports to steam drum headers with temperature ranges up to 800°F, while API 5L X Grades 42 thru 70 are utilized for the water and petroleum industry to transport liquids or as platforms on off-shore rigs.

Benefits of Carbon Steel Piping
Carbon steel piping is a durable material made from carbon steel, a steel alloy with iron and carbon. Because of its strength and ability to withstand stress, carbon Steel Pipe is used in a variety of heavy-duty industries like infrastructure, ships, distillers, and chemical fertilizer equipment.

Carbon Steel Pipes
The incredible strength of carbon steel means that carbon steel pipe can be made thinner and with less material while still being able to transport high volumes. This makes carbon steel piping a cost-effective material. Not only can less of it be used, but carbon steel is also recyclable, making it both environmentally-friendly and cost-effective.

Because it's easy to manufacture, carbon steel piping is a versatile material. We can make it in a variety of thicknesses and dimensions. It's also easy to cut and bent to fit wherever it's needed. Its also easily connected to joints, valves, and other pipe fittings.

Standard Carbon Steel Pipe Specifications & Grades
A/SA-106 Seamless Steel Pipe
ASTM A106 seamless steel pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.
Scope
ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.
NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.
Process
Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.
1/2" Nominal to 24"O.D. Seamless Pipe

Wall Thicknesses - Schedule 40 up to 4.000"

A/SA-53 Seamless steel pipe
ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas and air lines. It is suitable for welding and for forming operations involving coiling, bending, and flanging, subject to certain qualifications.
American Piping Products stocks a full range of A53 pipe (SA53 Pipe) in:
Grade B
NPS 1/8" to 26" diameter
Schedules 10 through 160, STD, XH and XXH
Scope
ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded Pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.
Materials and Manufacture
The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding.

Flanges & Fittings
Carbon Steel Butt Weld Fittings: A/SA-234 WPB * WPC
Carbon Steel Forged Fittings: A/SA-105
Carbon Steel Flanges: A/SA 105

High Yield Carbon Steel Pipe Specifications & Grades
API5L Seamless - Grades B (X42, X52, X60, X65 and above)
High Yield Carbon Steel Flanges & Fittings
High Yield Butt Weld Fittings: A- 860 or MSS SP75
WPHY42 (Y52, Y56, Y60, Y65)
High Yield Flanges: A-694 (F42, F52, F56, F60, F-65)

Seamless Steel Pipe Application

Carbon structural steel pipe is versatile and useful for a variety of applications. Some of the most common uses of carbon steel piping are:
Building foundations
Transporting natural gases or oil
Boiler and condenser tubes
Transporting wastewater
Chemical Processing
High-pressure applications
Transporting sewage
Bollard construction
Shipbuilding
Shoring
Trash enclosures
Distillers
OEM applications

Packaging And Transportation

1) Packaging: 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve or as customers' requirements.

2) Shipping: We have long-term cooperation with many experienced shipping companies and will find the most suitable mode of transportation for you.

3) Trade terms: FOB/CIF/CFR

4) Shipping port: Qingdao/Tianjin/Shanghai

5) Shipment: A: Length: ≤6m, loaded in 20GP Container. B: Length: ≤12m, loaded in 40GP Container.

Remark: Size of 20GP Container (inside :5898*2352*2393mm); Size of 40GP Container (inside:12032*2352*2393mm); Size of 40HQ Container (inside:12032*2352*2698mm).

6) Delivery time: Normal size: 7-15days send from warehouse directly. Special size:15-30days custom made for you.